Reassemble

Reassembly is a bit fiddly. See the guide here (cached here).

1. With the drive in place push the circuit board back on top.
2. Put in the 5 screws
3. Put the outer case back on (be careful of the TV/LCD switch).
4. Click the outer case back into place - be sure that it's snugly fit all around - don't use too much force.
5. Put in the 7 black screws.
6. Reattach the battery.

Now you're ready for the messing about with the software.

>> Partitioning

25 April 2006
Ashley Frieze