Newbie Floating Down The Mistic River
PMP 140 60gb tutorial/kill the boot failure/formatting PMP
That's very easy, but this experience costed me lota nerves.
Maybe also usefull for those who NTFSed their 40-gb drrive and get a boot failure
1. connect your PMP to the pc
2. if your drive is not unutilized, delete all partitions with SWISSNIFE tool
http://compuapps.com/download/Swissknife/swissknife.htm
3. create ONE partition by the same SWISSNIFE: system FAT32, remember, leave 8-10 mb unallocated!
4. then launch PowerQuest Partition Magic 8.0 (reachable via eMule), set the partition active and run format. The program will ask you to reboot the system. Do as it says. After the reboot your drive will be formated
5. don't disconnect the cable until windows loads completely
6. disconnect the cable, turn the device off (on|off button)
7. turn it on again (there must be "boot failure")
8. connect to the PC, drop the iRiverSys by ShamrockMan (Respekt 4 the disassemley guide & sysem files)
9. disconnect the cable, reboot the PMP by the same way
10. that hell is working!!! 57209 MB!
Maybe also usefull for those who NTFSed their 40-gb drrive and get a boot failure
1. connect your PMP to the pc
2. if your drive is not unutilized, delete all partitions with SWISSNIFE tool
http://compuapps.com/download/Swissknife/swissknife.htm
3. create ONE partition by the same SWISSNIFE: system FAT32, remember, leave 8-10 mb unallocated!
4. then launch PowerQuest Partition Magic 8.0 (reachable via eMule), set the partition active and run format. The program will ask you to reboot the system. Do as it says. After the reboot your drive will be formated
5. don't disconnect the cable until windows loads completely
6. disconnect the cable, turn the device off (on|off button)
7. turn it on again (there must be "boot failure")
8. connect to the PC, drop the iRiverSys by ShamrockMan (Respekt 4 the disassemley guide & sysem files)
9. disconnect the cable, reboot the PMP by the same way
10. that hell is working!!! 57209 MB!